MakerBot Replicator 2 Manual do Utilizador descarregar pdf (Página 42)

Can’t load MakerBot

PLA Filament into

the extruder

Make a fresh cut at the end of the MakerBot PLA Filament.

Cut the MakerBot PLA Filament at an angle—a narrow tip

will help with loading. It is also important that the ﬁlament

have no bends in it.

Use more force when pushing the MakerBot PLA Filament

into the extruder. Grasp the ﬁlament ﬁrmly and push it into

the middle of the hole on top of the extruder. To increase

your grip, you can hold the ﬁlament with a pair of pliers.

Ensure that you insert the MakerBot PLA Filament straight

down into the extruder, not diagonally.

Aer you feel the motor grab the ﬁlament, continue to

maintain pressure on the ﬁlament for another ﬁve seconds.

Extruder makes a clicking

noise when loading

MakerBot PLA Filament

This probably means that the plunger in your extruder is

exerting too much pressure on the ﬁlament. Adjust the

plunger using the instructions on page 51 of this manual.

PROBLEM SOLUTION

Object is stuck to

build plate

Wait for the object to cool down. Objects will detach more

easily aer they have cooled.

If the object is still stuck, take a thin metal cra spatula from

your MakerBot Replicator 2 package and carefully work the

blade under the edge of the object. When the blade is most of

the way under the object, twist the handle slightly. The object

should come free.

42 E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE

TROUBLESHOOTING Common Problems and How To Fix Them

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Sem comentários

MakerBot Replicator 2 Manual do Utilizador Página 42