MakerBot Replicator 2 Manual do Utilizador descarregar pdf (Página 27)

27C STARTUP PROCESS: LEVELING, LOADING, TESTING

Push the guide tube back into the opening

on the top of the extruder.

NOTE: If you have problems or need to load the

MakerBot PLA Filament again, you can use the up

and down arrows to scroll through the top-level

menu on the LCD panel and use the M button to

select Utilities. Scroll to Change Filament and select

it. Then select Load. You can use these menus to

return to the load script at any time.

Return the Filament Guide Tube

LOADING MAKERBOT PLA FILAMENT CONTINUED

Wait a few minutes for the extruded PLA

to cool, then pull it o the nozzle. You can

discard this extra ﬁlament. Don’t touch the

nozzle; it may still be hot.

Don’t leave plastic clinging to the extruder

nozzle. This can cause newly extruded

plastic to stick to the nozzle instead of the

build platform.

Remove the Extruded PLA

Unloading MakerBot PLA Filament

If you need to unload the MakerBot PLA Filament, the LCD menu will walk you through the

process. To run the script for unloading the ﬁlament, go to the LCD panel and select Utilities >

Filament Options > Unload.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Sem comentários

MakerBot Replicator 2 Manual do Utilizador Página 27